Spring Activations

Spring Activations Consist of the Following

Domestic Water Supply Systems

Inspect and reassemble Backflow Prevention Device.

Energize Water Source for System.

Operate each individual Zone from Controller and observe operation of individual sprinklers and Drip Irrigation if present.

Adjust sprinklers for optimum spray and arc settings.

Program Controller for Spring Watering requirements.

Install new battery in Controller if equipped.

If present, install new Battery in Wireless Rain Sensor and confirm operational status.

Confirm operational status of wired Rain Sensor.

Provide an estimate to repair any broken parts found.

Provide recommendations for Conservation and Upgrade of System.

Pump Systems

Install all Plugs on Pump removed during Winterization.

Re-Connect Suction and Discharge Lines to Pump.

Prime Pump and initiate Pump Operation.

Operate each individual Zone from Controller and observe operation of individual sprinklers and Drip Irrigation if present.

Adjust sprinklers for optimum spray and arc settings.

Program Controller for Spring Watering requirements.

Install new battery in Controller if equipped.

If present, install new Battery in Wireless Rain Sensor and confirm operational status.

Confirm operational status of wired Rain Sensor.

Provide an estimate to repair any broken parts found.

Provide recommendations for Conservation and Upgrade of System.